产品手册
《线缆经理人》
发布信息当前位置: 首页 » 供应 » 电线电缆 » 网络线 » 6 »

UTP六类电缆(Solid)

点击图片查看原图
品牌: 信基
单价: 面议
起订: 10 m
供货总量: 1000000 m
发货期限: 自买家付款之日起 3 天内发货
所在地: 上海
有效期至: 长期有效
最后更新: 2014-08-18 17:50
浏览次数: 136
询价
公司基本资料信息
 
 
产品详细说明
UTP Cat5E 与Cat6线缆之间最大的差异在于传输性能.Cat5E传输频率为100MHz,而Cat6则可以达到250MHz。Cat6比Cat5E有更优越的性能,表现在插入损耗、近端串音、回程损耗、等电平远端串音方面。这些优点带来了更高的信号/噪音比,为现有的应用提供更好的可靠性,为将来的应用带来更高的传输速度。
The general difference between category 5e and category 6 is in th transmission performance,and extension of the available band width from 100MHz for category 5e to 250MHz for category 6,this includes better insertion loss,near and crosstalk(Next),return loss,and equal level far end crosstalk(ELFEXT)These improvements provide a higher sighal-to-noise ratio,allowing higher reliability for current applications and higher data rates for future applications.
 
应用 Applications:
Gigabit Ethernet
ATM 622 or higher
Broadband Video(77 chanels 550MHz)
行业标准Industry Standards:
UL/CSA Listed CM.CMR
UL and ETL Verified to ANSI/TIA/EIA568B Category 6
ISO/IEC-11801
产品说明 Product Description:
Conductor:23AWG Bare Solid Copper
Insulation:HDPE,FRPE
Jacket:FRPVC
电气特性 Product Electrical Characteristics:
 Impedance:  特性阻抗  100+/-15 ohms
 Mutual Capacitance,Max.nf/1000ft:  相互电容  17.1
 DC Resistance,max.Ohms/1000ft:  最大直流电阻  28.6 
 DC Resistance Unbalance of a pair:  直流电阻不平衡(一对)  5%max
 Capacitance Unbalance(Pair to  Ground):  电容不平衡(线对对地)  330pf/100m max
 Propagation Delay Skew:  传播延迟偏差  45ns/100m
 Normal Velocity of Propagation:  正常传播速度

 66%

 

频率

Frequency MHz

衰减

Attenuation Max dB/100M

近端串音功率和

Power Slln NEXT dB/100m
等电平远端串音
ELFEXT MIN(dB/100m)
0.772
1.8
74
70
1
2.0
72.3
67.8
4
3.8
63.3
55.8
8
5.3
58.8
49.7
10
6.0
57.3
47.8
16
7.6
54.2
43.7
20
8.5
52.8
41.8
25
9.5
51.3
39.8
31.25
10.7
49.9
37.9
62.5
15.4
45.4
31.9
100
19.8
42.3
27.8
200
29.0
37.8
21.8
250
32.8
36.3
19.8

0条 [查看全部]  相关评论
 
更多»本企业其它产品

[ 供应搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]